我現在未編輯過的vmnetdhcp.conf內容如下
SERVER-1 London 192.168.9.128(host) 192.168.10.128(NAT)
SERVER-2 Taiwan 192.168.9.129(host) 192.168.10.129(NAT)
要怎麼修改才對呢?
還有在DNS 上建立Reverse Lookup Zone 相關資料 (PTR, Name Server )
是要在SERVER-1 還是2上做呢
要要用SERVER-1 現有的DNS修改
還是在SERVER-2 建立新的DNS呢?
#
# Configuration file for VMware port of ISC 2.0 release running on
# Windows.
#
# This file is generated by the VMware installation procedure; it
# is edited each time you add or delete a VMware host-only network
# adapter.
#
# We set domain-name-servers to make some clients happy
# (dhclient as configued in SuSE, TurboLinux, etc.).
# We also supply a domain name to make pump (Red Hat 6.x) happy.
#
allow unknown-clients;
default-lease-time 1800; # default is 30 minutes
max-lease-time 7200; # default is 2 hours
# Virtual ethernet segment 1
# Added at 02/15/05 13:58:12
subnet 192.168.9.0 netmask 255.255.255.0 {
range 192.168.9.128 192.168.9.254; # default allows up to 125 VM's
option broadcast-address 192.168.9.255;
option domain-name-servers 192.168.9.1;
option domain-name "localdomain";
default-lease-time 1800;
max-lease-time 7200;
}
host VMnet1 {
hardware ethernet 00:50:56:C0:00:01;
fixed-address 192.168.9.1;
option domain-name-servers 0.0.0.0;
option domain-name "";
}
# End
# Virtual ethernet segment 8
# Added at 02/15/05 13:58:40
subnet 192.168.10.0 netmask 255.255.255.0 {
range 192.168.10.128 192.168.10.254; # default allows up to 125 VM's
option broadcast-address 192.168.10.255;
option domain-name-servers 192.168.10.2;
option domain-name "localdomain";
option netbios-name-servers 192.168.10.2;
option routers 192.168.10.2;
default-lease-time 1800;
max-lease-time 7200;
}
host VMnet8 {
hardware ethernet 00:50:56:C0:00:08;
fixed-address 192.168.10.1;
option domain-name-servers 0.0.0.0;
option domain-name "";
option routers 0.0.0.0;
}
# End
