我先試試看
有問題再問大家

現在Server和Client之間的網路通了
但是現在只有Server可以連上Internet
例如Client1
ping DC1結果如下
Pinging 192.168.1.1 with 32 bytes of data:

Reply from 192.168.1.1: bytes=32 time<1ms TTL=128
Reply from 192.168.1.1: bytes=32 time<1ms TTL=128
Reply from 192.168.1.1: bytes=32 time<1ms TTL=128
Reply from 192.168.1.1: bytes=32 time<1ms TTL=128

Ping statistics for 192.168.1.1:
  Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
  Minimum = 0ms, Maximum = 0ms, Average = 0ms
==============================================
ping DC2結果如下
Pinging 192.168.1.2 with 32 bytes of data:

Reply from 192.168.1.2: bytes=32 time=2ms TTL=128
Reply from 192.168.1.2: bytes=32 time<1ms TTL=128
Reply from 192.168.1.2: bytes=32 time<1ms TTL=128
Reply from 192.168.1.2: bytes=32 time<1ms TTL=128

Ping statistics for 192.168.1.2:
  Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
  Minimum = 0ms, Maximum = 2ms, Average = 0ms
==============================================
nslookup的結果如下
*** Can't find server name for address 192.168.1.1: Non-existent domain
*** Can't find server name for address 192.168.1.2: Non-existent domain
*** Default servers are not available
Default Server: UnKnown
Address: 192.168.1.1
=================================================
ipconfig/all 結果如下
Windows IP Configuration

    Host Name . . . . . . . . . . . . : Taipei
    Primary Dns Suffix . . . . . . . : nwtraders.msft
    Node Type . . . . . . . . . . . . : Unknown
    IP Routing Enabled. . . . . . . . : No
    WINS Proxy Enabled. . . . . . . . : No
    DNS Suffix Search List. . . . . . : nwtraders.msft

Ethernet adapter Local Area Connection:

    Connection-specific DNS Suffix . :
    Description . . . . . . . . . . . : VMware Accelerated AMD PCNet Adapter

    Physical Address. . . . . . . . . : 00-0C-29-66-A1-06
    Dhcp Enabled. . . . . . . . . . . : No
    IP Address. . . . . . . . . . . . : 192.168.1.101
    Subnet Mask . . . . . . . . . . . : 255.255.255.0
    Default Gateway . . . . . . . . . : 192.168.1.2
    DNS Servers . . . . . . . . . . . : 192.168.1.1
                                192.168.1.2
==============================================
ping Giga Cable Modem的DNS
Server端正常
Client端結果如下
Pinging 203.133.1.6 with 32 bytes of data:

Request timed out.
Request timed out.
Request timed out.
Request timed out.

Ping statistics for 203.133.1.6:
  Packets: Sent = 4, Received = 0, Lost = 4 (100% loss),

ping另一個DNS

Pinging 203.133.1.8 with 32 bytes of data:

Request timed out.
Request timed out.
Request timed out.
Request timed out.

Ping statistics for 203.133.1.8:
  Packets: Sent = 4, Received = 0, Lost = 4 (100% loss),
==============================================
有辦法從以上的資料看出是哪裡有問題嗎?
要如何做修正呢?

1. 檢查 DNS 中DC1 & DC2 對照表(正反向)
2. 不知道市否有否修改VmWare Networkwork Configuration,預設x.x.x.1 應該為該網段Defatul Gateway.
3. PING 封包未出去,請檢查 DC2 (Gateway for Client) 及 Vmware Network Configuration.

既是作Lab 應該不用每台都上Internet .達到解答就可以.

對不起
我才學到2274剛開始
所以很多我都還不懂
以致於你所說的
我不知道該怎麼做
1.對照表要從哪看?
2.這要到哪裡設定?
3.要怎麼檢查啊?
可否詳細說明
因為我想要把問題解決
從中獲得經驗
不管是以後考試也好
還是以後工作上
或許會有同樣的問題發生
謝謝!!

先Check VmWare Network Configuration , two methods:
1. 程式集-->VmWare-->VmWare Workstation-->Manage Virtual Network
2. VmWare Workstation Menu --> HOST-->Virtual Network Setting

你可以確認 Vmnet0(Bridged), vmnet1(Host-Only), vmnet8(NAT) DHCP 提供之預設IPs是否有沖突.理論上 Client DNS 設為 DC2 & DC1, DNS 也允許Dymanic Update 在DNS dnsmgmt應可看到所有設備名稱及IP,若沒有表示有問題.

nslookup 所顯示訊息非問題所在,你可
nslookup
>server 192.168.1.1 <------ 指定 Default Server

測正向名稱解讀, 在 "Rervse Lookup Zones" 定義New Zones - "1.168.192.in-addr.arpa" 然後定義New Pointer (PTR)將 192.168.1.1 & 192.168.1.2 HOST Name 定義就ok. 若有問題多訂一各Domain Name for this Zones.

至於PING 問題較廣,就自己看著辦.

PING 應該是Default GateWay 的問題, Check 是不是有衝突, 在我的Lab Vnet8 DHCP 有一點發瘋, 192.168.1.x 之Default Gateway 是 192.168.73.2.

我的是192.168.64.2
正確應該是多少啊?

是否確認 Vnet0(Hot-only) 及 Vnet8(NAT) 所提供之網段數值?
若與你期望要填的網段不同先在Virtual Network Setting 更改，舉例：若安裝好之Vmware Vnet8 所提供DHCP 網段為 192.168.77.x ，基本上它所指定之 Gateway 為 192.168.77.2 ，上一回覆主要我所碰到之問題；若192.168.64.2 為你 Vmware 所定義之Gateway，那請Review 所有 OS 所定義之網段是不是與VmWare 所定義之Virtual Network 網段相當。若要以 MCSE教材為主請更改Virtual Network 網段之值。

我的數值如下
VMnet0(Bridged)

VMnet1(Host-only)
Subnet:192.168.239.0
Netmask:255.255.255.0
Start IP address:192.168.239.128
End IP address:192.168.239.254
Broadcast address:192.168.239.255

VMnet8(NAT)
Subnet:192.168.64.0
Netmask:255.255.255.0
Start IP address:192.168.64.128
End IP address:192.168.64.254
Broadcast address:192.168.64.255
Gateway IP adress:192.168.64.2
照你說的話
我要以MCSE教材為主
是要把VMnet8(NAT)
改成以下這樣:
Subnet:192.168.1.0
Netmask:255.255.255.0
Start IP address:192.168.1.1
End IP address:192.168.1.254
Broadcast address:192.168.1.255
Gateway IP adress:192.168.1.2
對嗎?

Yes. 改完再重新啟動Service 就ok. 不過XP Client 是直接由Vmware Gateweay --> HOST-->NIC--> Internet. 若要XP Client 由 DC-2 轉出則要另外改完兩個網段(HOST-Only, NAT). 先試通再說